Raspberry Pi Setup

EDGE Settings

By default, the edge will be launched when the Raspberry Pi is powered up. To change the edge’s startup flags, run the command on the Pi:

  • sudo nano /etc/supervisor/supervisord.conf
  • Proceed to change the flags at the bottom on the configuration file
  • Exit, save, and run sudo shutdown -r now to complete setup

Raspberry Pi Network Settings

A network connection can be setup by simply connecting an ethernet cord or running the following commands to connect to a wireless network.

  • sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
  • Set SSID and PASSWORD to your desired network settings
  • Exit and save the changes
  • Restart the Raspberry sudo shutdown -r now